This DC operated mini submersible water pump is ideal for small vending machines and other applications, in which a small amount of water has to be pumped. The operating voltage for this DC pump is between 3 to 9V and can be easily controlled with development boards like Arduino, Raspberry Pi, ESP, and other microcontrollers, so also frequently used in DIY electronics projects and hobby projects. The pumping height for this mini DC water pump is between 40 to 110 cm.
Based on 0 reviews
Be the first to review “3V to 9V Mini DC Submersible Pump”
Related products
-
3D Printer and Accessories, BLDC Motor, Drone, Other Drone Parts, Water Pump
HOBBYWING 5L 12-14S Brushless Water Pump For Agricultural Drone
-17%
3D Printer and Accessories, BLDC Motor, Drone, Other Drone Parts, Water PumpHOBBYWING 5L 12-14S Brushless Water Pump For Agricultural Drone
The brushless water pump can be used normally for more than 500 hours, which is 3-5 times the service life of ordinary water pumps.
There is no need to worry about the damage of the water pump, frequent replacement and delaying operations while reducing after-sales costs.
Features:
The internal integrated ESC turns on temperature protection and current protection. When the water pump is blocked or abnormal
the current will increase.
The ESC immediately executes the current protection function, disconnects and restarts. When the temperature of the water pump is too high, as a result, when the temperature of the ESC reaches 110°C,
the ESC will perform temperature protection and power down operation.
These protection functions effectively reduce the loss of the water pump caused by sudden failure.
The overall water pump protection is IP67After use, it can be directly rinsed with water to keep it clean and tidy, reducing pesticide corrosion
Package Includes:
1 x HOBBYWING 5L 12-14S Brushless Water Pump For Agricultural Drone
SKU: n/a -
3D Printer and Accessories, Water Pump
R385 6-12V DC Diaphragm Based Mini Aquarium Water Pump
- Model : R385
- Rated Voltage : DC 6V to 12V (1 amps)
- Working current: 0.5A to 0.7A (Max)
- Power: 4W-7W
- Max Lift: 3m
- Max Suction: 2m
- Max Water Temp: 80 °C
- Pump Size: 90mm * 40mm * 35mm approx
- Fluid: 0-100 ° C
- Input/output tube diameter: outer 8.5mm, inner 6mm approx
- Max Current: Up to 2 Amps while starting up
- Life: up to 2500 Hours
- The maximum flow rate of up to 1 – 3L/min.
SKU: n/a -
3D Printer and Accessories, Servo Motor and Accessories
TOWER PRO 9G MICRO SERVO MOTOR
The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck use
Features:
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Rotation: 180 degrees
Operating Temperature Range: -10 to +60 Degree C
Operating Speed (4.8V): 0.12sec/60 degrees at no load
Operating Speed (6.0V): 0.10sec/60 degrees at no load
Stall Torque (4.8V): 1.8kg/cm
Stall Torque (6.0V): 2.4kg/cm
360 Modifiable: Yes
Bearing Type: Ball Bearing
Gear Type: Nylon Gears
Connector Wire Length: 12″
Dimensions: 22×11.5x27mm
Weight: 11gSKU: n/a
There are no reviews yet.